Our People

Jeremy Robinson

General Manager

Jeremy joined the BTT team in 2017 as an undergraduate and has since continued on to be a full time member of BTT’s team. During his tenure with BTT his knowledge in regards to vehicle standards and compliance has been displayed consistently, with his approval to be a signatory for heavy and light vehicles evidence of this. Jeremy has significant experience with vehicle approvals and has extensive knowledge of the ROVER process. He has a strong working relationship with all stakeholders in the commercial vehicle industry and explores all avenues to ensure that the best possible outcome is achieved for the client through legal, safe and fit for purpose vehicles. Jeremy also brings a strong knowledge of CAD based modelling, design and finite element (FE) analysis to the company, allowing designs to be drawn and tested to ensure compliance with the standards. He also produces professional technical reports for clients which can be utilised for expert witness, insurance or general safety enquiries. Jeremy is a Chartered Engineer with Engineers Australia, along with being on the National Engineering Register (NER) and being a registered professional engineer in both Victoria and Queensland in Mechanical Engineering as required by their state legislation

Damir Marusic

Mechanical Engineer - CASUAL

Damir obtained his degree in 2014 and has been working in the commercial vehicle modification and compliance industry since. He is an approved engineering signatory for the national heavy vehicle regulator (NHVR) and has previously managed an engineering workshop, primarily modifying heavy vehicles and trailers for clients such as Downer Group and Scania. Through Damir’s well grounded knowledge of the vehicle compliance rules and regulations, as well as his attention to detail and fastidious approach to his work, he has proven to be invaluable to BTT Engineering and its clients.

Logan Veldhuis

Mechanical Engineer

During his time at university, Logan was heavily involved with the Formula-SAE Team, serving as the Head of Manufacturing. He joined BTT Engineering as an undergraduate in early 2019 and has built a sound knowledge base in vehicle compliance and standards in a short period of time. Since joining the team full time in early 2020, a strong interest in the industry has led to him to become an approved signatory for both heavy and light vehicle compliance. Bringing a strong knowledge of CAD based modelling, design and finite element (FE) simulation to the company, allowing him to draw designs and analyse them to ensure compliance with the standards. Logan has been assisting clients with PBS certifications where his understanding of the scheme, relationships within the industry and strong commitment to ensuring the best outcomes for the client has resulted in numerous new PBS vehicles on the road network.

Peter Whitley

Mechanical Engineer

Peter graduated from the University of Tasmania in 2016 with a Degree in Mechanical Engineering. When he was not studying, Peter was working in the Formula-SAE Team, where his focus was on engine development. Upon graduation, Peter entered the Fulton Hogan graduate program. During this time, he gained a wide experience in the asphalt industry before transitioning to the maintenance workshop, where he developed a preventative maintenance system. Seeking to return to his passion for automotive engineering, Peter joined the BTT Engineering team in November 2021. With his experience, Peter brings a breadth of knowledge in heavy industry and construction equipment. Peter has quickly become a key asset in PBS certification and conducts CAD modelling and finite element analysis.

Vincent Marciano

Mechanical Engineer

Vincent graduated from Melbourne University in 2019 and inaugurated their first electric Formula-SAE car using a dual chain drive system. Post University, he gained experience in automotive Defence managing system compliance and design of fuel tanker trucks, liquid modules and floating pontoon bridge interfaces. In this role, he utilised design tools like FMEA (failure modes and effects analysis), coordinated subcontractors and performed physical testing to Defence standards. His passion for automotive engineering led him to BTT where he can apply his Defence experience and extend his knowledge base to the wider commercial vehicle industry. Vincent aims to quickly get up to speed in VASS certification and become an expert in engineering design and management of BTT's projects.

Jay Kim

Mechanical Engineer

Jay has a degree in mechanical engineering from Auckland University of Technology in New Zealand. He started his automotive engineering career as an assistant engineer working for 3 years with a CPEng and Heavy/Light Vehicle Specialist. As this bolstered hi interest in the automotive industry it led him into a heavy trailer manufacturing company for the next 5 years. This has led him in having gained a strong knowledge of heavy vehicle manufacturing and regulatory compliance process. Jay is a NZTA appointed Heavy Vehicle Specialist Certifier holding HVEA (Heavy Vehicle Engineer Load Anchorage) and HVET (Heavy Vehicle Engineer Towing Connection) categories in New Zealand. Deciding to relocate his family to Australia he has now joined BTT Engineering in late 2024 with a big opportunity and ongoing support from our highly knowledgeable and professional team members. Jay is currently working towards becoming a VASS Signatory and PBS Certifier in Australia and move his career to the next level.

Jack Quigley

MECHANICAL ENGINEER

Jack joined the BTT team full-time in early 2023 after graduating from the Australian Maritime College in late 2021.  Throughout his time at AMC Jack has built a sound knowledge regarding design, maintenance, and management of mechanical and mechanical-electrical systems. Since starting with BTT Jack has been exposed to a wide variety of certifications and modifications involving trailers, commercial and heavy vehicles. This has also involved the use of 3D CAD modelling and Finite Element Analysis software. Jack looks forward to further developing his career, personal and professional skills with BTT Engineering in the years to come.  

Jakob Haas

mechanical ENGINEER

Jakob is an undergraduate studying a Bachelor of Science and Bachelor of Engineering with Honours, majoring in Mathematics and specialising in Mechanical Engineering, at the University of Tasmania. Large crossover between degrees has enabled Jakob to pursue additional passions in programming and mechatronics through the completion of several Electrical and Electronics units. Throughout university Jakob has pursued several placement and employment opportunities in an attempt to establish areas of interest within the field of Engineering. He has completed placements at Caterpillar with their test and validation team, learning how command systems are validated in the laboratory and through field testing. Jakob also works alongside CSIRO bio‑acousticians and electronic engineers, to help optimise the equipment and methods used for fishery stock assessment and bluewater biological research. Jakob has remained a keen member of the BTT team whilst exploring other areas of Engineering. Here Jakob has become proficient in CAD based modelling and finite element analysis and has begun to grasp the processes involved in a wide range of vehicle and trailer certifications and modifications. Eager to continue to develop personally and professionally, Jakob looks forward to what the future holds within BTT Engineering.

Sharon Vasterink

Chain of responsibility manager

Sharon joined the BTT team in late 2023 and brings with her over 21 years of experience in compliance support, operational system reviews/development, people management, project management, risk assessments and training. Sharon has extensive experience in various facets of the private and public sectors, assisting a diverse range of clients in meeting their obligations to the Heavy Vehicle National Law (HVNL) and their prime contractor requirements, including assisting companies in developing continuous improvement strategies and performance accountabilities. Sharon specialises in Chain of Responsibility (CoR) compliance; she has been nominated as a CoR consultant expert in National Heavy Vehicle (NHVR) enforcement undertakings and Court interventions (Supervisory Intervention Orders) and assisted clients in meeting their legal actions. Sharon is currently working with the NHVR and another industry experts to provide input and feedback for the registered industry code of practice (Master Code) review. The BTT team is delighted to have Sharon on board and look forward to seeing her expertise continue to deliver value for the heavy vehicle industry.

Paul Tindal

pbs & access consultant

Paul joined the BTT team in late 2023 and has worked in the transport industry for over 3 decades. Paul has previously worked for VicRoads in a number of departments, including being a regional manager for the Registration and Licensing Services and then state manager for Motor Vehicle Standards and Compliance. During his time at VicRoads Paul worked on numerous registration and licensing projects on both a state and federal level, as well as completing work for international government clients. Paul has since transitioned into roles in private enterprise, with his previous role involving assisting companies in identifying the best performing PBS combination that would suit their transport needs and subsequently project managing the manufacturing, PBS certification and access requirements for the company and combination, thus ensuring the best outcomes for the client. Paul’s skillset also involves interpreting state and federal gazettes/notices and regulations to support client’s heavy vehicle operations and compliance needs.  Paul’s experience is a valuable addition to the team and further strengthens BTT’s specialist knowledge regarding PBS certification, while also being able to add crucial support by assisting clients in getting road network access for their heavy vehicle combinations.

Dharma McIntyre

CoR, Accreditation & Permit Administration Officer

Dharma joined the BTT team early in 2024 and is a seasoned professional with a strong background in Compliance, Accreditation, and Permit Administration within the heavy vehicle space. With a keen eye for detail and extensive knowledge of NHVL regulations, Dharma ensures adherence to compliance standards while streamlining operational processes. Beyond Dharma’s professional endeavours, she is deeply passionate about staying up to date on industry trends and regulations, continuously expanding her knowledge to better serve clients. With a passion for efficiency and excellence, Dharma is dedicated to facilitating seamless operations and regulatory compliance within the industry.

Lisa Barry

ADMINISTRATION OFFICER

Lisa’s experience in administration spans 30 years. She was a Medical Receptionist for a radiology clinic, which gave her the chance to connect with people and develop a strong customer service focus. Other roles include Office Manager and Executive Assistant to the Managing Director of a leading media buying agency and Receptionist with Brisbane’s largest advertising agency, where she worked closely with six sister companies and one hundred and forty staff.  She has a Master of Arts in Creative Writing with a thesis that focuses on Peer-Assisted Learning. Lisa's experience of multi-tasking in a world of high energy, deadlines, and tension, framed with integrity and genuine compassion for others are vital assets for BTT Engineering's clients and team.  

Bryan Nguyen

undergraduate engineer

Bryan is currently an undergraduate at the University of New South Wales, studying a bachelor of honours in mechanical engineering, where he has acquired extensive knowledge of mechanical engineering design principles and CAD software skills. His passion for heavy vehicles started at a young age when he was involved in assisting with maintenance on his father’s truck, developing the understanding of mechanical systems. In previous employment experiences, Bryan has been involved in working at a four wheel drive accessory fitting workshop and as a general fabricator at Clarke Industries, developing his knowledge for manufacturing design processes and further mechanical vehicle intricacies. At BTT engineering, Bryan has been able to utilize his acquired engineering skillsets and vehicle understandings to quickly become knowledgeable in the PBS certification scheme while also continuing to strengthen his CAD modelling and finite element analysis skills.

Ben Wilkinson

PBS OFFICER

Ben joined the BTT team late 2024, bringing with him a diverse range of skills from previous roles within the Mining, Engineering/Fabrication and Hydraulic industries based in Central Victoria. Previous roles have seen significant project work within the Quarry and Mining fields providing major input into the fitment of Mining Elevators and Quarry Plant upgrade projects across Australia and New Zealand. Bens trade qualifications and skills also include Cert 3 in Engineering – Mechanical Trade which includes Fitting and Turning, Welding and Hydraulic Maintenance. Ben also is a Certified Crane Operator and Heavy Vehicle Transport driver. The hands on industry experience that Ben brings to the BTT team is already being utilised by our PBS team and current PBS clients which Ben has assisted to help meet their PBS needs and expectations.